General Features

A Series / C Series / E Series / ED Series / H Series

ROLLON's Uniline aluminum profile designs provide added torsion-resistance and less deflection increasing the systems to higher high stiffness.

No binding on the bearings.

RPP Belt are used in all actuators (parabolic shaped teeth) for high load transfer and nylon coating in the inside for longer belt life.

Clear anodized hart coating of all extrusions.

Actuators are also available with long, double or custom trolley designs.

UNILINE A Series

The A’s have a COMPACT “T”-rail mounted flat inside the profile.
This simple configuration is perfect for most applications.

View A Series in Catalog Navigator

UNILINE C Series

The C’s have a COMPACT “T”-rail mounted face to face with a Compact “U”-rail.
This configuration is ideal for vertical or single axis or where great My moments are present.

View C Series in Catalog Navigator

UNILINE E Series

The E’s have a COMPACT “T”-rail mounted flat inside the profile and one Compact “U”-rail mounted externally.
This configuration offers superior rigidity and is well suited for single axis applications or where a great Mx moment is present.

View E Series in Catalog Navigator

UNILINE ED Series

The ED75 have a Compact “U”-rail mounted flat inside the profile and two Compact “U”-rails mounted externally; one on each side.
This configuration offers superior rigidity and is well suited for single axis applications or where a great moments are present.

View ED Series in Catalog Navigator

UNILINE H Series

The H units are “slave units” with a COMPACT RAIL U-rail inside. The U-rail and slider allow the units to function and absorb parallelism errors in the mounting structure. The H units consist of the aluminum profile, a U-rail and slider, and the trolley. There are no pulleys and there is no belt. These units must always be mounted close together with another UNILINE actuator (not another H unit).

View H Series in Catalog Navigator

UNILINE Mounting Accessories

All plates mentioned in this chapter come with all the holes necessary for connecting any two units. They also come complete with T-nuts and screws.
Please note that in case the plates are used with “C” family units, some fixing holes on the supporting profile are not used because the profiles have only one slot. This does not effect the performance.
When connecting two or more units please make sure that the connection is made to the profile body and not the heads alone.

View Mounting Acc. in Catalog Navigator

A Series / C Series / E Series / ED Series / H Series